No products in the cart.
Overview
This product is for Racing Competition only and is not legal for use in
highway or
street vehicles or other non-racing competition off-road vehicles.
Purchasing this product requires you to sign our Vehicle Compliance Waiver here.
This fully programmable Plug and Play product opens the door to virtually limitless performance modification and tuning of your vehicle. Programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
Features:
- Direct plug and play replacement of the OEM ECU, no re-wiring necessary
- Uses the cars factory sensors
- Supports Sequential Injection (peak and hold) and Direct fire ignition
- Windows 2000, XP, Vista, Windows 7 compatible software
- Real time programming, instant hesitation free adjustment while engine is running
- Fully user definable 32 x 32 mapping
- Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
- Diagnostic trouble code storing and Check engine light control (Access through laptop only )
- Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
- Wideband “auto tuning” using user definable target AFR table
- USB and CAN Communication Port
- 4 x Fuel Injector outputs
- 2 x Ignition outputs
- Tacho, Boost Control, AC Clutch Relay, Idle Control
- Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)
- MAF sensors, Throttle Position Sensor, Oxygen sensors
- Coolant Temperature sensor, Vehicle Speed Sensor, Air Temperature sensor
- Expansion I/O: 2 x Analogue Voltage inputs
- 2 x Analogue Temperature inputs
- 4 x Digital pulsed outputs
- Closed Loop O2 Control
- Decel Cut Over Boost Rev Limiter
- Closed & Open Loop Boost Control
- Gear Setup
- ACF On Base Tables
- Transient Throttle Enhance
- Correction Tables: Fuel Ignition Boost: Cranking, Air Temp Target Correction, Coolant Temperature Correction, Map Correction, Zero Throttle Gear Correction, Cylinder Trim, TPS Correction, Generic Correction 1, Generic Correction 2, Gear Correction, Post Start, Air Temp Duty Correction, Post Start
- Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
- Max 20 channels logging capability
- Tune can be password protected in software
- Rugged anodized aluminum casing
- Power Requirements: 8.6 to 16.5 Volts DC
- Consumption: 530mA @ 12Volts DC
- ECU Dimensions Length: 154mm (174mm with MAP nipple) Width: 158mm Height: 42mm Weight: 680g (1.5 lb)
Fitment:
- Honda S2000 AP2 Non DBW 2005-2009
Installation Instructions:
Note:
- For Racing Use Only
- Pictures used for marketing purposes only, actual product may vary.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Fitment
|
Make Vehicle | Model | Year |
|---|---|---|
|
2005-2009 Honda S2000 | S2000 | 2005-2009 |
About Brand
Who Is Haltech?
Haltech has been at the forefront of engine management technology since its inception in 1986. For the last 30-plus years, the company has been globally recognized as a leader in its field, renowned for its cutting-edge technology and customer support. To uphold its reputation, Haltech continues to adapt and stay up to date with new emerging technologies and changing expectations from car enthusiasts, racers, and tuners alike. The company currently has two main offices, one in New South Wales, Australia, and the other in Lexington, Kentucky, U.S.
With an ever-evolving industry like the automotive one, some things still remain a constant. That includes Haltech’s unwavering commitment to quality and innovation, as well as the passion and dedication of the Haltech team to deliver products that are second to none. These qualities have been the company’s trademark from the very beginning and are the main reason why thousands of consumers all around the globe trust Haltech for their engines.
What Does Haltech Do?
Haltech designs and manufactures a wide range of automotive performance electronics; it is best known for its engine management systems. Its engine management systems are engineered to control throttle bodies, staged fuel injection systems, distributors, direct injection systems, and engines of all types, including turbocharged, supercharged, and naturally aspirated. The brand offers a comprehensive lineup of ECU and standalone engine management products like CDI ignition systems, sensors, tuning tools, engine harness kits, engine control units, and more!
Today, Haltech ECUs are sold in more than 50 different countries around the world. Haltech ECUs allow you to make the most of your car’s existing engine. These units are specifically designed to control various aspects of modern engines, including the engine load, air intake, and RPMs. These readings help the ECU regulate the fuel supply and spark plug timing to ensure your engine is running to optimal power and fuel efficiency. Haltech ECUs have been proven over and over again, and are the driving force behind many record-setting racecars. In fact, Haltech is credited as being the first in the world to develop real-time engine management calibration.
Part of the Car Community
The company’s active YouTube channel aims to help customers get the most out of Haltech’s products via DIY projects, fitment instructions, setup tutorials, product reviews, and entertainment segments. In addition, Haltech is also actively involved with many popular car culture shows like Discovery Channel’s Street Outlaws and Mighty Car Mods. It also participates in numerous racing and motorsport events such as NMCA/NMRA, SEMA, PRI, World Cup Finals, Summernats, and the World Time Attack Challenge.
Purchase Haltech Parts at Vivid Racing
Vivid Racing carries a wide range of Haltech products to unleash your engine’s full potential. Our inventory includes dash displays, tuning box kits, interior mounts, ECU flashes, universal fuel injectors, standalone ECUs, and numerous tuning accessories. If you have any questions regarding the parts above or have fitment concerns, please contact our specialized sales team at (480) 906-4066. We are here to make the purchase process a pleasant and seamless experience for all of our customers. We look forward to helping you take your car’s engine to the next level and enjoy newfound power gains.
Warranty
Unless specified otherwise, Haltech warrants its products to be free from defects in material or workmanship for a period of 12 months from the date of purchase.
If the Haltech product is found to be defective as mentioned above, it will be replaced or repaired if returned prepaid along with proof of purchase. Proof of purchase in the form of a copy of the original purchase invoice, receipt or bill of sale which indicates that the product is within the warranty period, must be presented to obtain warranty service.
Replacement or repair of a defective product shall constitute the sole liability of Haltech. To the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representations, either expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Haltech, be liable for special or consequential damages.
Be the first to review “Haltech Platinum PRO Direct Plug in ECU Kit Honda S2000 AP2 Non DBW 05-09”
Related products
Stand Alone ECU
Haltech Plug ‘n’ Play Adapter Harness Kit Nexus S3 Subaru WRX | STI MY 2011-2019 (ADM)
$2,590.00
$495.00
Reviews
There are no reviews yet.