No products in the cart.
Overview
DEFEAT HEAT SOAK
IE’s FDS Intercooler is your ultimate weapon against heat soak. Heat soak occurs when the heat generated by the turbocharger and engine exceeds the cooling capacity of the intercooler. The most common symptom is the noticeable loss of power during WOT acceleration or several back-to-back pulls. By increasing the core size and useable area of the core with FDS technology, we have significantly reduced intake air temperatures
consistently lower than OEM and competition intercoolers.
FDS DYNAMICS
This comparison uses advanced Computational Fluid Dynamics (CFD) software to detail our FDS fin design’s result on flow through the intercooler end tank. Notice the increased charge air distribution entering the top and across the intercooler core. The better this flow is distributed will increase intercooler efficiency and the speed at which it can expel heat from the core.
LEADING FEATURES
- FDS forces airflow evenly through entire core
- 65% larger core size than stock
- 28.6% lower intake air temps
- 9% lower pressure drop than stock
- +24WHP & + 24WTQ on Stage 1 tune
- 21.9″x11.37″x3.35″ bar & plate core size
- Massive 834 cubic inch core volume
- Defends against power-robbing heat soak
- Recovers from heat soak faster
- Increases horsepower and torque
- Compatible with Adaptive Cruise Control (ACC)
- In-house CNC machined aluminum cast end tanks
- Hand TIG welded, and pressure tested in the USA
- Bolt-in hassle-free design for easy install
- Computational Fluid Dynamic (CFD) optimized
- High-grip and beveled inlet/outlets for boost-leak free connections
Fitment:
- Audi RS3 2017-2020
- Audi TTRS 2018-2021
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Fitment
|
Make Vehicle | Model | Year |
|---|---|---|
|
2017-2021 Audi RS3 | RS3 | 2017-2021 |
About Brand
Who is Integrated Engineering?
Integrated Engineering was founded in 2007 in Salt Lake City, Utah. It was started by two brothers Peter and David Blais. The two shared the same passion for racing, and this has jumpstarted the two to create Integrated Engineering.
The company specializes in manufacturing performance products such as rods, camshafts, valve trains, and Billett accessories. Today, they have become a household name when it comes to performance.
German Car Experts
Integrated Engineering focuses on producing performance products for Audi and VWs. As the experts in these platforms, they are able to pinpoint exactly what parts need to be improved to bring out the best in those vehicles. The company considers not only the performance gain but its reliability as well. Their goal is to turn these vehicles into a better performing machine without compromising its reliability.
Attention to Detail is the Key
To create top quality products, the company carefully studies each design detail using specialized software. This enables them to fine-tune the design before it goes to actual manufacturing. They first test their design in ABS plastic to ensure that all measurements are accurate and on the spot. Once everything has been checked, their performance products are then tested in their in-house engine and chassis dyno machine for long hours to test its performance and reliability.
This attention to detail has enabled their parts to perform in extreme conditions and withstand the punishment usually endured during high-performance applications.
Purchase Integrated Engineering Products at Vivid Racing
If you want to improve the way your Audi or VW performs, then Integrated Engineering has got you covered. Their expertise in these platforms has made them the go-to brand when it comes to performance, and it has gained them the trust of many enthusiasts everywhere. Visit Vivid Racing and see their list of products that would fit your specific needs.
Be the first to review “IE FDS Intercooler Audi RS3 | TTRS 2017-2021”
Related products
$1,090.00
Reviews
There are no reviews yet.