No products in the cart.
Overview
This product is for Racing Competition only and is not legal for use in
highway or
street vehicles or other non-racing competition off-road vehicles.
Purchasing this product requires you to sign our Vehicle Compliance Waiver here.
Stillen is proud to offer the Stillen supercharger system for the Nissan and Infiniti VQ37 (370Z/G37/Q50.) This supercharger system took over a year to develop and involves some revolutionary designs. This supercharger system is developed to offer the customer easy upgradability and installation without requiring a hood replacement to complete the installation! With this supercharger system Stillen bump the power output to over 500 horsepower! With lots of room to grow! Some of the more noteworthy features of the supercharger are: Air to water intercooler: By redesigning the intake manifold Stillen were able to incorporate the intercooler inside the manifold, thus allowing us to cool the air charge immediately before the air enters the engine. Additionally, the front mounted heat exchanger does not block the airflow supplying cool air to other vital coolers such as the radiator, engine oil cooler, transmission cooler, power steering cooler or the A/C condenser. Because water is 4 times more efficient at dissipating heat than air, Stillen are able to utilize a more compact heat exchanger to cool the water. Air to water intercooling is not the only benefit of the redesigned intake manifold. By increasing the runner length Stillen are able to increase torque. Also, the large volume of the intake manifold allows the engine to draw from a much larger (than factory) air source.Vortech V3 supercharger: This supercharger system incorporates the Vortech V3 self-lubricating supercharger system. With a completely sealed supercharger system there is no concern of having to run additional oil lines or anything like that. Also, the V3 supercharger is a much quieter system than previous models. The major features to the Vortech supercharger are the ease of upgrading power later on, as well as the installation without having to modify the hood! To handle the fuel management for the supercharger system Stillen has gone directly to the ECU. By changing out to larger injectors and fuel pump (supplied in complete kit) Stillen is able to take control of the factory ECU and re-map it for the boosted application. This tuning method is handled via reflash using the UPrev software tuned by Stillen engineers. This supercharger system comes in two options. Either fully tuned (most popular) or Tuner. The tuner kit is supplied with all hardware. There is no tune or tuning software included. Tuning is the responsibility of the end user or the end user’s shop, No warranty is expressed or implied on tuner kits.
Features:
- Turn-Key Bolt-On Tuned Kit
- Satin Vortech V-3 Supercharger Unit
- Air/Water Intercooled
Fitment:
- Nissan 370Z Touring 2012-2015
Notes:
- Pictures used for marketing purposes only, actual product may vary.
Other Part Numbers:
Stillen #407772-DJJX
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Fitment
|
Make Vehicle | Model | Year |
|---|---|---|
|
2012-2018 Nissan 370Z | 370Z | 2012-2018 |
About Brand
Who is Stillen?
Stillen is an aftermarket company founded by Steve Millen. Steve is a professional race car driver with 30 years of experience under its belt.
Using his racing experience, he built a company that would, later on, revolutionized the aftermarket industry. Stillen parts can be found in every performance and tuner cars in the market and have been a household name in the tuning industry even up to this day.
Proven Formula
Steve Millen has been chosen by various media platforms to conduct vehicle testing of some of the most high-end and powerful sportscars. This allowed him to get vital information on how to improve and bring out every car’s potential.
Comprehensive Product List
Stillen is a company that focuses on putting performance in every vehicle. Hence, no part is left untouched. If changing a particular part would improve the vehicle, then Stillen would have an upgrade for it.
They offer parts ranging from engine components, drivetrains, forced inductions, intercoolers, radiators, electronics, suspension parts, brakes, and even body kits. They are basically a one-stop brand for those who want only the best performance parts in the market.
Purchase Stillen at Vivid Racing
Stillen has been improving vehicles for decades, cementing its status as the industry leader and has become an aftermarket icon. They have created some of the best cars in the world and are continuing its tradition of producing parts that perform well on the street and on the track. Visit Vivid Racing and check out the list of parts that would fit your specific requirements.
Warranty
WARRANTY INFORMATION:
Exhaust:
- The manufacturer warrants that all SMSP Exhaust Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuses or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number. SMSP acknowledges that parts may be discontinued. If the exhaust product has been discontinued, SMSP may not be able to offer a replacement option.
No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.
This warranty does not extend to cosmetic blemishes and/or finish deterioration. Stainless steel does require cleaning and maintenance to retain its finish. Failure to do so can result in surface corrosion which is not covered by warranty.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Stainless Steel Systems: Limited Lifetime Warranty against manufacturing defects and rust through.
Intakes:
- The manufacturer warrants that all SMSP Air Intake Products are free from defects. Most of our intake products are warranted against failures and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the air intake products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any air intake product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the intake product, or any participating dealer, when making a claim for replacement. The original air intake product must also be returned and exchanged for a new air intake product of the same part number. SMSP acknowledges that parts may be discontinued. If the intake product has been discontinued, SMSP may not be able to offer a replacement option.
No other warranty, expressed or implied (including merchantability), applies to the air intake product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the air intake product, or inconvenience or interruption in any operation.
This warranty does not extend to cosmetic blemishes and/or finish deterioration. SMSP air intakes are manufactured out of various materials each requiring care and maintenance. SMSP does not guarantee that these finishes will not deteriorate with age and use and this deterioration may be accelerated with neglect and misuse.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Sway Bars:
- The manufacturer warrants that all SMSP Sway Bar Products are free from defects. Most of our Sway Bar products are warranted against failures and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the Sway Bar products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any Sway Bar product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the sway bar product, or any participating dealer, when making a claim for replacement. The original sway bar product must also be returned and exchanged for a new sway bar product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the sway bar product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the sway bar product, or inconvenience or interruption in any operation.
This warranty does not extend to cosmetic blemishes and/or finish deterioration. SMSP sway bars are manufactured out of various materials each requiring care and maintenance. SMSP does not guarantee that these finishes will not deteriorate with age and use and this deterioration may be accelerated with neglect and misuse.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Urethane:
- The manufacturer warrants that all SMSP Poly-Urethane Products are free from defects. Most of our soft Poly-urethane products are warranted against failures and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. Most of our hard Poly-Urethane products are warranted against defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the Poly-Urethane products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any Poly-Urethane product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents or impacts. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the Poly-Urethane product, or any participating dealer, when making a claim for replacement. The original Poly-Urethane product must also be returned and exchanged for a new Poly-Urethane product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the Poly-Urethane product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the Poly-Urethane product, or inconvenience or interruption in any operation.
This warranty does not extend to finish deterioration. SMSP Poly-Urethane products must be stored in a cool, dry environment, out of direct sunlight when not installed on the vehicle. Improper storage can lead to material warping, discoloration, and other results. SMSP does not guarantee that these finishes will not deteriorate with age and this deterioration may be accelerated with neglect and misuse.
SMSP is not responsible for costs incurred due to the customer or body shops failure to test fit and/or inspect product prior to painting. SMSP is not responsible for costs incurred due to the customer or body shops failure to follow SMSP instructions on the proper cleaning and preparation of parts prior to painting.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Brake Pads:
- The manufacturer warrants that all SMSP Brake Pad Products are free from defects. Most of our Brake Pad products are warranted against failures and defects in material and workmanship for one year on the components of the kit. The warranty is void if the Brake Pad products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any Brake Pad product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, maintained, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the Brake Pad product, or any participating dealer, when making a claim for replacement. The original product must also be returned and exchanged for a new product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the Brake pad product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Brake Rotors:
- The manufacturer warrants that all SMSP Brake Rotor Products are free from defects. Most of our Brake Rotor products are warranted against failures and defects in material and workmanship for one year on the components of the kit. The warranty is void if the Brake Rotor products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any Brake Rotor product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, maintained, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the Brake Rotor product, or any participating dealer, when making a claim for replacement. The original product must also be returned and exchanged for a new product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the Brake Rotor product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
SMSP Brake Rotors are finished with a corrosion resistant plating material. This material is removed by the friction between the rotor and pad. During the time the plating is being removed the customer may feel and/or hear “unusual†noises. In most cases this is the plating material being removed and is to be considered normal. We can not give a timeline as to how long this will take to remove as there are many variables including but not limited to; driving style, driving type (highway vs. city), regularity of vehicle use, etc. If the unusual characteristics persist past the point the plating has been removed please consult SMSP for further guidance.
Warranty Addendums:
- Damages caused by improper use, installation, modifications and/or collisions will be considered user-error and will NOT be covered under warranty.
- User assumes all risks and costs associated with the use of SMSP products.
- Products purchased from un-authorized dealers will not be covered under warranty.
- Warranties only cover the initial purchaser and will not transfer to second hand users.
- Failure to provide the required invoice, images and/or warranty claim form will result in the denial of the warranty claim. NO EXCEPTIONS.
- SMSP is not responsible for fees associated with the installation/removal/servicing of components.
- KEEP YOUR FACTORY PARTS. SMSP will not provide temporary
Be the first to review “Stillen Supercharger System Satin Nissan 370Z Touring 2012-2018”
Related products
$4,968.59
Reviews
There are no reviews yet.